Bomba peristáltica ZETA-PE - para trasfega líquido, bagaço, uva inteira, mostos

• MADE IN STAINLESS STEEL AISI 304
• AMBIVALENT SUCTION (R-L)
• DRY RUNNING
• IN-DEPTH AUTO-PRIMING
• 1 SPEED FOR Z-PE 16
• FREQUENCY DRIVE CONTROLLER FOR Z-PE 30/45/50/65
• MADE IN ITALY

Peristaltic pumps have the most gentle movement of wine/must pumps. Thanks to the coupling to the hopper (optional) is possible to transfer mash consistency fluids, dregs, destemmed grapes and other alimentary products. The type or work assure a linear pumping, limited squashing and a complete absence of product heating. Rubber hose is compressed by rotating aluminum rollers mounted on bearings for minimum friction. The rubber hose is lubricated at the factory with food grade lubricant and does not need periodic lubrication. The machine is entirely manufactured in stainless steel, including the components not in direct contact with the pumped fluid.

Advantages and Characteristics:

• Variable Speed Frequency Drive on all units.
• Speed adjustable from the control panel (standard)
• Long range remote control available [forward/reverse, stop/start, and speed] (optional)
• Self priming till 7 mt. depth
• Maximum exercise pressure of 6 bar (on request till 15 bar with vacuum system)
• Reversible flow
• Hose is lubrication-free. Food grade hose is lubricated during manufacturing and does not need periodic lubrication
• Rotating aluminum rollers reduce friction and extend hose life
• Pressure compensators on both inlet and outlet eliminate 'knocking'
• Optional pressure switch
• Optional hoppers for must/pomace. Choose between integrated and free-standing; Integrated hoppers connect directly to the pumps---inlet flange of pump is bolted to outlet flange of hopper. Stainless steel hopper and auger. Motor with gear reduction. Takes ~15 minutes to attach/remove the hopper
• Optional vacuum for greater flow; particularly useful with must
• Optional Dual Level Float control for hopper
• Safety stop in case of rubber pipe damages/breaking
• Easy cleaning with "C.I.P." cycles (clean in place)

VACUUM CONTINUOUS SYSTEM:

Vacuum system increases the flow rate. It is particularly useful when pumping must or pomace. Must and pomace pumping rate can be increased up to 40% with this option. Vacuum also increases priming depth to 8 metres.