Hüdrauliline pakkpress VORAN 180P2 ROTARY - Õuna mahlapress

Packing press with rotary cage 180P2 with hydraulic lifting and lowering device

Packing press with two pivoting juice basins (rotating carriage) and hydraulic power unit. Easy and safe operation thanks to automatic pressure relief valve on hydraulic power unit.

• Scope of supply: 22 press cloths 100 x 100 cm, 24 press insets acacia wood 65 x 65 cm
• Height juice outlet: 525 mm
• Connection for juice outlet: 1 ¼
• Juice yield: up to 75 %
• Press pressure: 320 bar
• Press force: 50 to
• Material: packing frame and juice basin in 1.4301 / AISI
• Weight: 1 020 kg
• Discharge height: 1 380 mm
• Height: 1 875 mm
• Width: 885 mm
• Length: 2 150 mm
• Electrical protection: 10 A
• Connected load: 400V 50Hz (3 phases)
• Motor rating: 2,2 (3,0) kW (PS)
• Nominal rating: up to 1 200 kg/h
• Made in Austria

Processable materials

Apples, Pears, Quince, Blueberries, Beetroot, Carrots, Manioc, Vegetables.

This is only an example list of materials that have been tested and processed in practice.

Everything you need

We can tell you why the 100P2 is so popular with our customers: it is a straightforward investment that pays for itself quickly even with a low number of fruit trees.

The excellent production quality and accompanying long lifespan of the machine are additional arguments.

If you can deal with an hourly output of around 600 kilograms, the voran® 100P2 packing press is the right choice. If you need higher performance, you will find the right machine on the following pages.

100P2 — compact, high-quality, affordable.

Ergonomics meets efficiency

Our packing presses enable a more efficient pressing process. The pivot operation enables the emptying and filling of the second container during the pressing process. Depending on the desired production quantity, we deliver packing presses in two different sizes: with hourly output of 600 (100P2) or 1,200 kilograms (180P2).

The result is always clear: up to 75% yield with a very low suspension ratio.

The highlights of the 180P2

• All parts that come into contact with the fruit are made of food-grade stainless steel, wood or plastic.
• Simple operation
• Hydraulic cylinders located below—hydraulic oil cannot enter the mash
• Presses with flat position without foundations
• Massive design
• Over-pressure valve
• A press ram subdivided by inserts ensures the juice runs off quickly. This has a high work speed therefore lower oxidation.

Accessory package

Acacia wood or stainless steel press inserts and fabrics made from resistant polyester